An open-source idea. A little hardware.

Muse Gadgets,
within reach.

Take the conversation off the keyboard. Explore hardware for the Muse AI agent, from a pocket screen to a board you build yourself.

Independent community project · Own SDK token required

M5StickS3-based device on a desk stand, its screen showing a cute cream character, next to a small plush
Rendered image. Plush shown for styling, not included.

Small screen. Hands-on controls.
A pocket device based on M5StickS3.

Your token, added by you.
Devices ship without an SDK token.

Built on an open project.
ESP32 firmware + a Linux SDK.

A new way to build

What are Muse Gadgets?

Meta released Muse Gadgets on October 2, 2026: an open-source project that connects self-built hardware to its Muse AI agent. This site helps you explore the boards, setup path and our independent hardware offering.

Built around the open-source Muse Gadget SDK, licensed under Apache-2.0. Muse account access and your own SDK token are required. Read the SDK terms before use.

Device lying on a bedside table beside a cream plush toy
Rendered image. Plush shown for styling, not included.
Preorder / M5StickS3

A place for your
next conversation.

Pocket Gadget pairs a 1.14-inch colour screen with physical buttons, a microphone and a rechargeable battery. The upstream SDK supports push-to-talk, text replies and images on StickS3.

$79 + $15 tracked shipping

Explore the pocket device

Dispatch within 30 days · Full refund before shipping

From box to browser

Your token. Your setup.

Paste your own token at /setup — it never leaves your browser. The installer is Beta: firmware is built, physical testing is still pending.

01 / RECEIVE

Unbox your device

Your hardware arrives without an SDK token. Get your own token from your Muse account.

02 / CONNECT

Plug in USB-C

Use a data-capable cable and a desktop browser with WebSerial support.

03 / MAKE IT YOURS

Add your token at /setup

The browser writes your token into the firmware locally, then flashes your connected device (Beta).

Open Beta setup →

Choose your format

Different boards.
The same starting point.

The upstream ESP32 SDK lists 17 boards. Some show a status light; others add screens, buttons and image support. Raspberry Pi 5 is a separate Linux SDK path.

Light & button

ESP32-C5 DevKitC-1 offers a status light and button for a straightforward DIY starting point.

Pocket screen

M5Stack StickS3 combines a screen interface, push-to-talk, a two-button menu and images.

E-paper & desktop

Seeed reTerminal E1001 and E1002 display status and images on larger e-paper screens.

From token to talking

How Muse Gadgets work

Every gadget follows the same four steps, whichever board you choose.

1 / TOKEN

Get an SDK token

Create a personal SDK token in your Muse account (Account > SDK tokens). Every gadget needs one to pair. The token is compiled into the firmware, and the SDK terms allow one token in up to 50 devices.

2 / FIRMWARE

Flash the firmware

The upstream path builds the open-source firmware with ESP-IDF v6.0.1 on macOS or Linux, by hand or with a coding agent. Our Beta web flasher skips the toolchain and runs in desktop Chrome or Edge, including on Windows.

3 / PAIR

Pair in the Muse app

On iOS or Android, open Settings > Devices, turn on Developer mode, and look for a device whose name starts with “MuseGadget”.

4 / USE

Talk, show, control

Screen boards add push-to-talk and can display images Muse sends them. On boards with PSRAM, a home-network tunnel lets Muse reach devices on your Wi-Fi that expose a local HTTP API.

Ideas worth building

What you can build with Muse Gadgets

The project ships with featured ideas, and the SDKs are open for anything you can wire up.

Pocket push-to-talk

A palm-sized screen with a button: hold to speak, read the reply, see an image. This is the format of Pocket Gadget, built on M5Stack StickS3.

E-ink morning briefing

A Seeed reTerminal E1002 shows six-colour images on a 7.3-inch e-paper panel — a calm desk display that only changes when Muse has something to show.

Home-network bridge

An ESP32-C5 DevKitC-1 with a status light and button can connect Muse to the TVs, speakers and other devices on your network that expose HTTP — the same idea as Muse Home Link.

Homelab helper

Install the Linux SDK on a Raspberry Pi 5 and add your own commands, so Muse can take on sysadmin chores or talk to your Home Assistant setup.

Round desk buddy

Waveshare's 1.75-inch round AMOLED boards run the full on-screen UI with an animated avatar, push-to-talk, settings and images.

Your own board

Boards the project has not tried yet can be added: describe the flash size, buttons and PSRAM, and extend the device configuration in the open-source SDK.

Pick your path

Three ways to start with Muse Gadgets

All three need your own Muse account and SDK token.

Upstream buildOur web flasher (Beta)Pocket Gadget preorder
What you needA supported board, ESP-IDF v6.0.1, a terminalStickS3 or ESP32-C5 DevKitC-1, a USB data cableNothing extra — the device arrives ready for setup
ComputermacOS or LinuxWindows, macOS or Linux with Chrome or EdgeSame as the web flasher, once
BoardsAll 17 ESP32 targets + Linux devices2 boards todayM5StickS3
CostYour boardYour board; the flasher is free$79 + $15 tracked shipping
Best forHacking on the firmwareSkipping the toolchainSkipping the parts hunt

Before you begin

A few good questions.

Is this official?

No. This is an unofficial community project, independent of Meta Platforms, Inc. We sell our own hardware offering and link to the open-source Muse Gadget SDK.

What are Muse Gadgets?

Muse Gadgets is an open-source project from Meta, released on October 2, 2026. ESP32 firmware and a Linux SDK let people connect their own hardware to the Muse AI agent.

Is an SDK token included?

No. Devices ship without an SDK token. Paste your own token at /setup — it never leaves your browser during setup. Obtain your token from Muse and read its SDK terms before use.

Is the browser installer ready for everyday use?

It is Beta. Firmware is built from the upstream SDK and passes image checks, but the installer has not yet been tested on physical hardware. An ESP32 can always be re-flashed over USB.

When will my preorder ship?

We commit to dispatch from Shenzhen within 30 days of your order. Tracked shipping costs $15 per order. You can request a full refund before dispatch. Import duties and VAT are payable by you.

Which browsers support the web flasher?

Desktop Chrome or Edge over HTTPS, because flashing uses Web Serial. Safari and Firefox do not support Web Serial. The flasher works on Windows, macOS and Linux, so you do not need the macOS/Linux ESP-IDF setup the upstream guide describes.

What if flashing fails?

An ESP32 can be re-flashed over USB at any time: its built-in ROM bootloader accepts new firmware even after a failed write. If the board is not detected, hold its BOOT button while plugging in the USB cable, then try again.

Is my SDK token safe on this site?

The token is written into the firmware in your browser memory and cleared after each attempt. It is never sent to our server, saved in browser storage or put in a URL, and analytics are not loaded on /setup or /flash.

Do Muse Gadgets work with Raspberry Pi?

Yes. Besides the ESP32 firmware, the project includes a Linux device SDK, and Raspberry Pi 5 is one of the listed devices. The Linux path suits commands you add yourself, such as sysadmin chores or a Home Assistant setup.

What is Muse Home Link?

Muse Home Link is a small USB-C device made by Meta that connects Muse to your home network. The first run was 5,000 units, free with an active Muse subscription in the United States, one per subscriber. See our Home Link alternatives page for other options.

Can I use a board I already own?

The upstream ESP32 SDK lists 17 supported boards. Their displays and controls differ. Our Beta browser installer initially targets StickS3 and ESP32-C5 DevKitC-1; other boards use the upstream build workflow.